Dish Network Satellite Receivers Complement Any Home Entertainment System

Even though HDTV (high definition television) is all the rage these days, Dish Network hasn’t neglected its commitment to provide great television programming and technological features to all of its subscribers; even those who choose not to subscribe to its high definition television programming packages. The standard definition television satellite receivers that Dish Network offers are good examples of this continuing commitment.

Dish Network’s standard definition satellite receivers have an impressive blend of technological features that make watching television more convenient and enjoyable. One example of features that come on all of Dish Network’s standard definition satellite receivers is the Dish Interactive Electronic Program Guide. The Electronic Program Guide, or EPG as some people call it for short, is the central part of the software that guides the Dish Network television viewing experience. Just like its name suggests, the Dish Interactive Electronic Program Guide is an on screen TV program listing that tells you what’s on all of the channels that you have access to, when it’s on, who stars in it, what it’s about, and even how long it lasts. If the “it” in question happens to be a full length movie, the EPG will even tell you what the MPAA has rated it or let you know if it doesn’t have a rating. The Electronic Program Guide also ties into Parental Control Lock software which can be set to block your kids from accessing programming that you don’t want them watching according to a variety of criteria. On receivers with built in digital video recorders, the Electronic Program Guide also makes it easy to program in what TV shows and movies you want to record (more on that later).

Some Dish Network receivers will also supply TV signals to two separate televisions located in different rooms of the house. That way different family members can watch different programming at the same time. The receiver is installed in the living room or home theater with the household’s primary TV set, and then connected to another TV set located elsewhere in the house by using a coaxial cable which is run through the walls. A second remote control also comes with these receivers and operates on frequencies that can penetrate walls and keeps the receiver from confusing remote control signals from people watching the different televisions.

One of the most useful types of technology that’s built into some of Dish Networks satellite receivers is digital video recording. A digital video recorder is basically a high capacity hard disk and some special software. Together they can record programming from up to two channels at the same time and then play it back when convenient. At first glance it may seem that a digital video recorder serves the same purpose as a VCR, but further examination reveals that it actually does a better job than any VCR. That’s because a digital video recorder is programmed through the intuitive interface of the Electronic Program Guide rather than the obscure interface used by old fashioned VCR’s. This makes a digital video recorder a pleasure to use, and if it’s a pleasure to use, it will be used a lot more than the VCR ever was. The other difference comes from the fact that a digital video recorder can store up to two hundred hours of programming and doesn’t require the use of video cassette tapes.

In all Dish Network’s standard definition satellite receivers are a great addition to any home entertainment system.

Ways to Install a PEX Tubing System

Installation of PEX plumbing systems should be carried out strictly according to the project in hand. Normally, PEX plumbing systems are installed by trained professionals with technical knowledge of the system. But if you want to install PEX plumbing systems on your own then there are certain things you would have to keep in mind before you set out to do the actual task of installing a full-fledged PEX plumbing system.

What is PEX?

Firstly, you have to know what PEX is. For the uninitiated, PEX is cross-linked polyethylene. These are often used for radiant heating purposes, but now these are also used extensively for hot and cold plumbing installations. PEX tubing and plumbing systems are easy to work with since they are quite flexible. This is one advantage PEX systems have over normal copper systems. Owing to its design, PEX is also more durable under temperature extremes and chemical attack. It is also highly resistant to creep deformation.
Steps to be followed while installing PEX:

Below is a simple step by step guideline on how to install such a plumbing system. Just follow these steps carefully and you will be able to install a PEX plumbing system at your home without the help of any technician. It will also save you some extra bucks.

Things required for installing a PEX Plumbing system:

  • PEX piping and fittings
  • PEX crimps
  • PEX manifold with ball valves
  • Nailing plates
  • PEX stub outs

Tools:

  • Hammer
  • Soldering machine
  • PEX cutting equipments
  • Straps
  • Hangars
  • Paddle bit
  • Crimp gauge
  • Right-angle drill

Step-1:

Slowly start drilling after you have placed the bit up to the stud. Increase your drilling speed as you move forward. While drilling, just make sure that each hole is at the same level so that the pipe can run parallel to the floor. Also drill through the sill plate and sub-floor for individual water lines.

Step-2:

After you are done with drilling, insert and run the water lines through those holes. In most cases, the water lines come through the floor. But in certain other cases, the lines may come through the wall studs. In those cases, make sure you drill the holes right at the center so that while hanging the board, the screw and nails of the board do not harm or damage the pipes in any way.

Step-3:

Pull the lines upwards through the holes on the sub-floor. Also, run the other end to the area where water will be coming into the home. Leave pout some extra pipes on both the ends. Now use the clamps and secure the lines to the joists. Make sure, you keep the hot and cold lines as far apart as possible to minimize heat transfer.

Step-4:

Now do the rough stub-outs for the sinks. You can use a right-angle drill or a paddle bit to carry out this task. Just make sure to cut-off the rough fitting cap and install finish valves after you put up the walls.

Step-5:

It is now time to install the crimps. For the perfect crimp set up, make sure the PEX is straight when you cut it. Now slide a crimp ring onto and then insert the pipe in the crimp fitting. Use slip-joint pliers to slide the crimp ring up. Do not do it with your fingers, or else you might hurt yourself while tightening the crimp ring. Make sure the crimp ring is 1/8 inches or 1/4 inches from the end of the pipe.

Step-6:

Now rough the lines to the fixtures. Do not solder around the PEX tubing or you might end up damaging the pipes. You should use a fitting called PEX 90. After it has cooled from soldering, you can fit it onto the PEX water line.

Step-7:

Position the valve in a way where they will face down when they are hung in their places. Solder them to their positions.

Step-8:

You can now pull up the water lines from the crawlspace and connect them to the manifold. Screw the top brackets to stud keeping them at eye level. Also install the bottom brackets to the manifold.

Step-9:

Now mark all the holes with a nail and start drilling them. Just make sure you do not damage the manifold while you are doing your drilling work. Put the manifold on the ground after you have finished you drilling work.

Step-10:

Now you can attach the PEX ball valves to the manifold. Screw every valve onto its port properly. Get one of the lines and pull it up to the valve to make sure it fits properly. This type of arrangement will mean that each fixture will have its own shut-off valve.

Step-11:

After you are done with fitting the ball valves, you can now pull up the PEX tubing from the crawlspace and attach them at their places.

Plumbing: What Goes Into A Complete New House Installation?

If you are in the process of building a new home, congratulations! This can be an exciting time for you, and there is a lot that still has to be done before you can move in. You will need a lot of help to get everything in, and one of the most important moves you can make now, before things get too far, is to call in an experienced plumber to help you with the complete new house installation that you will need.

Laying the Groundwork

A complete new house installation of plumbing can be a tricky thing, and no matter how beautiful your dream home is, bad plumbing will sour the whole experience in no time. With the help of an experienced plumber, you can insure that what goes into your new home will be the best that money can buy, and be as reliable as you need it to be. The first job will be laying the groundwork for installation of all necessary products and pipes.

With the help of your plumbing consultant, work out a plan on paper, detailing every major and minor installation that will go into your new home. You can set it up, room by room, to help you keep track of everything that will be needed. For instance, the kitchen will have the dishwasher and the kitchen sink, while the bathroom will have the toilet and the bathroom sink. Be sure to include a layout of all connecting pipes, and do not forget outside faucet access, especially if you also have a septic tank in mind.

Remember the Inspector

All new construction must pass a county or state building inspection. To avoid pitfalls created by using plumbing not included in your area’s building code, be sure to double check every proposed installation against the local code authority’s guidelines. This is another aspect of plumbing installation where your plumber on retainer can be an invaluable resource.

Every area has its own local code requirements, as do state and national construction agencies. Your plumber can provide you with a list of applicable codes that your home falls under, and can walk you through them, step by step. This way, any potential problems can be spotted prior to installation, and you can alter your plumbing groundwork maps accordingly. No surprises for the inspector, and no headaches in the future for you.

Choose your Materials Wisely

Whenever someone works on building their own home, quality may be compromised in order to save on costs. Plumbing is one area where this should never happen. In order to get a fully functioning plumbing system the way you want, you have to spend a little more on quality materials, to make sure that it will not turn out to be a money pit later on.

No matter how well your home will be insulated, the area weather still needs to be taken into consideration when purchasing plumbing materials. Not all of your pipes will be under the protection of your home’s insulation, especially those that come into contact with the ground around your home. You will need to be certain that the materials you choose can stand up to the weather changes in your area, and that any pipes coming into the home from the exterior ground be protected against freezing and other environmental changes.

Installation and Testing

Once you have everything purchased, rely on your plumber and his crew to efficiently install everything for you. Unless you are a trained plumber yourself, it is best to let the professionals handle the actual installation, if possible. And, in the same spirit of avoiding ugly surprises, make certain that every inch of the installation gets thoroughly tested to make sure it works, without fault or leaks, before the building inspector arrives.

A complete new house installation of plumbing can be an exhilarating experience to participate in. By working hand in hand with a qualified professional plumber, you can easily eliminate all of the headaches and potential problems even the most experienced builder can face.